Does the BBB boot on its own (with a 5V power supply)? Do you get a login prompt on the monitor? Do you see the u-boot startup on the serial port (you may need to buy a special cable for that)?
I am not sure what's the point of doing the "Getting Started" procedures. You can just use it. Or better yet, download the Ubuntu image<http://elinux.org/BeagleBoardUbuntu> by Robert C Nelson, and use that. On Thursday, March 6, 2014 7:48:59 PM UTC-5, jqru...@gmail.com wrote: > > Hi all, > > I just bought the MakerShed getting started kit for the BBB. I unboxed the > board and plugged her in on my Ubuntu 13.10 box. After about a minute of > waiting, I saw no filesystem mounted for the BBB. I installed the drivers > on the Beagleboard.org website (under "Getting Started"), but to no avail. > I tried the same process on Windows 7, but that didn't work either. Any > insight to this? Thanks! > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.