I'm using Angstrom, but I'll see if I can grab that script and adapt it to work for my case. Thanks for the reference. - RT
On Mon, Mar 24, 2014 at 3:15 PM, Robert Nelson <robertcnel...@gmail.com>wrote: > On Mon, Mar 24, 2014 at 2:07 PM, RT Mistler <rtmist...@gmail.com> wrote: > > Hi, > > > > I'm trying to take the contents of flash that I have working and make a > copy > > of it for distribution. > > > > For instance, you can download a flash imager which will put the default > > release onto your MMC flash in it's entirety. I can do that, but then I > > have to customize to install or configure it to work the way I have > chosen > > for multiple boards. If I could use that flash imager process but have > the > > image it flashes be what I have now, this would be helpful. > > > > I do realize that I can use the dd command as well as connecting a uSD > card > > via a card reader and copy my entire flash over to that uSD and then that > > uSD will work on another board. That's a lot slower performing, not my > > first preference. On the flipside of that, I'm fairly positive that I > can > > NOT boot off of a uSD and then use dd to copy to my MMC flash; maybe I'm > > wrong there. That would be a good interim solution, but ultimately I > think > > it would be helpful if I could somehow create a flash image where the > > flasher would just burn my default disk as my starting point for each > board, > > this way an installer person could perform these actions and get > repeatable > > results on multiple boards. > > > > Anyone have any thoughts or know of a set of instructions that might be > > helpful? Believe me I've searched a bit, maybe just used the incorrect > > terms, I haven't found anything except the instructions about how to > > download the default flash image and burn that. > > Well, if your using the newer Debian images hosted here: > > http://beagleboard.org/latest-images > > There's a little gem, under /opt/scripts/tools/eMMC/*.sh to do what you > want. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/RkpLJm5bqBQ/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.