On Thu, Apr 17, 2014 at 4:50 PM, João Paulo <joao.bodan...@gmail.com> wrote: > Hi, > > Suddenly my bealgebone stop booting. > The log message is: > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > [ 1.156059] omap_i2c 44e0b000.i2c: controller timed out > [ 1.156104] tps65217 0-0024: Failed to read INT reg > [ 1.156123] tps65217 0-0024: Failed to probe pwr_but > [ 2.156056] omap_i2c 44e0b000.i2c: controller timed out > [ 3.159960] omap_i2c 44e0b000.i2c: controller timed out > [ 3.192906] omap2_mbox_probe: platform not supported > [ 4.262857] omap_i2c 44e0b000.i2c: controller timed out > [ 5.272375] omap_i2c 44e0b000.i2c: controller timed out > [ 6.786039] omap_i2c 44e0b000.i2c: controller timed out > [ 7.797989] omap_i2c 44e0b000.i2c: controller timed out > [ 9.311445] omap_i2c 44e0b000.i2c: controller timed out > [ 10.323312] omap_i2c 44e0b000.i2c: controller timed out > [ 11.836824] omap_i2c 44e0b000.i2c: controller timed out > [ 12.848568] omap_i2c 44e0b000.i2c: controller timed out > [ 14.362226] omap_i2c 44e0b000.i2c: controller timed out > [ 15.373935] omap_i2c 44e0b000.i2c: controller timed out > [ 16.887705] omap_i2c 44e0b000.i2c: controller timed out > [ 17.899350] omap_i2c 44e0b000.i2c: controller timed out > [ 19.413079] omap_i2c 44e0b000.i2c: controller timed out > [ 20.424713] omap_i2c 44e0b000.i2c: controller timed out > [ 21.938389] omap_i2c 44e0b000.i2c: controller timed out > [ 22.950188] omap_i2c 44e0b000.i2c: controller timed out > [ 24.463792] omap_i2c 44e0b000.i2c: controller timed out > [ 25.475572] omap_i2c 44e0b000.i2c: controller timed out > [ 26.989170] omap_i2c 44e0b000.i2c: controller timed out > [ 28.000916] omap_i2c 44e0b000.i2c: controller timed out > [ 28.514549] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom > [ 28.539322] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' > failed > [ 28.575588] pinctrl-single 44e10800.pinmux: pin 44e10854 already > requested by 44e10800.pinmux; cannot claim for gpio-leds.7 > [ 28.587309] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status > -22 > [ 28.594619] pinctrl-single 44e10800.pinmux: could not request pin 21 on > device pinctrl-single > [ 28.672322] cpufreq_cpu0: failed to scale voltage up: -22 > [ 28.678238] cpufreq_cpu0: failed to scale voltage up: -22 > [ 28.971626] hub 1-0:1.0: unable to enumerate USB device on port 1 > > > I dont have any device connected in the USB.
I'm left to wonder what you were doing right before it "failed".. It looks like the i2c bus is at-least shorting out.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.