Hi, Suddenly my bealgebone stop booting. The log message is:
Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 1.156059] omap_i2c 44e0b000.i2c: controller timed out [ 1.156104] tps65217 0-0024: Failed to read INT reg [ 1.156123] tps65217 0-0024: Failed to probe pwr_but [ 2.156056] omap_i2c 44e0b000.i2c: controller timed out [ 3.159960] omap_i2c 44e0b000.i2c: controller timed out [ 3.192906] omap2_mbox_probe: platform not supported [ 4.262857] omap_i2c 44e0b000.i2c: controller timed out [ 5.272375] omap_i2c 44e0b000.i2c: controller timed out [ 6.786039] omap_i2c 44e0b000.i2c: controller timed out [ 7.797989] omap_i2c 44e0b000.i2c: controller timed out [ 9.311445] omap_i2c 44e0b000.i2c: controller timed out [ 10.323312] omap_i2c 44e0b000.i2c: controller timed out [ 11.836824] omap_i2c 44e0b000.i2c: controller timed out [ 12.848568] omap_i2c 44e0b000.i2c: controller timed out [ 14.362226] omap_i2c 44e0b000.i2c: controller timed out [ 15.373935] omap_i2c 44e0b000.i2c: controller timed out [ 16.887705] omap_i2c 44e0b000.i2c: controller timed out [ 17.899350] omap_i2c 44e0b000.i2c: controller timed out [ 19.413079] omap_i2c 44e0b000.i2c: controller timed out [ 20.424713] omap_i2c 44e0b000.i2c: controller timed out [ 21.938389] omap_i2c 44e0b000.i2c: controller timed out [ 22.950188] omap_i2c 44e0b000.i2c: controller timed out [ 24.463792] omap_i2c 44e0b000.i2c: controller timed out [ 25.475572] omap_i2c 44e0b000.i2c: controller timed out [ 26.989170] omap_i2c 44e0b000.i2c: controller timed out [ 28.000916] omap_i2c 44e0b000.i2c: controller timed out [ 28.514549] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom [ 28.539322] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 28.575588] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7 [ 28.587309] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22 [ 28.594619] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 28.672322] cpufreq_cpu0: failed to scale voltage up: -22 [ 28.678238] cpufreq_cpu0: failed to scale voltage up: -22 [ 28.971626] hub 1-0:1.0: unable to enumerate USB device on port 1 I dont have any device connected in the USB. any idea? Thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.