Dear William Thank you so much for your help
I just confusing one thing which are couple of sentences: ( All of these steps will be described in more detail below. All of the options below also require the same set of materials. - BeagleBone Black - Display to connect BeagleBone Black to - Mouse and Keyboard (as well as a USB hub if they have separate dongles/cables) - Micro SD card 4 GB or more in size (8 GB is recommended but not neccessary) - Ethernet cable with working connection - Separate computer with internet connection to download and flash an image to micro SD ) These from http://elinux.org/Beagleboard:Desktops_On_Ubuntu/Debian#Ubuntu_Precise_On_A_microSD_With_Ubuntu_Desktop My project is about to achieve the Object or facial detection and tracking with Pan/Tilt using OpenCV If I would like to make it, should I prepare those equipment as shown as above (mouse, display, keyboard and powered usb hub)? If it is yes, how to connect with Beaglebone Black, cause as we know about the feature of it, it just has a little HDMI connect plug can be used. Using the transfer or similar like that? Thank your patient I am really looking forward your reply Your sincerely Yanlong Mu(Ian) On Thu, Apr 17, 2014 at 6:14 AM, William Hermans <yyrk...@gmail.com> wrote: > *dpkg-reconfigure locales *as root, or using sudo. Assuming the package > is installed properly. > > > On Wed, Apr 16, 2014 at 9:56 PM, Sungjin Chun <chu...@castlesoft.co.kr>wrote: > >> Did you generate locale data? For example, in arch linux (which I'm >> using), >> after configuration of /etc/locale.conf I should execute >> >> locale-gen >> >> so that configured locale data be generated. >> >> >> >> On Thu, Apr 17, 2014 at 12:57 PM, Yanlong Mu <ian.y...@gmail.com> wrote: >> >>> Hi Everybody >>> >>> I just get the new image boot on the BBB 12.04.2 LTS >>> >>> When I put the sudo apt-get update and upgrade, it showed some warning >>> as below >>> >>> locale: Cannot set LC_CTYPE to default locale: No such file or directory >>> locale: Cannot set LC_MESSAGES to default locale: No such file or >>> directory >>> locale: Cannot set LC_ALL to default locale: No such file or directory >>> >>> >>> And When I was going to install a desktops (xface) >>> >>> it showed >>> >>> perl: warning: Falling back to the standard locale ("C"). >>> perl: warning: Setting locale failed. >>> perl: warning: Please check that your locale settings: >>> LANGUAGE = (unset), >>> LC_ALL = (unset), >>> LC_TIME = "en_GB.UTF-8", >>> LC_MONETARY = "en_GB.UTF-8", >>> LC_ADDRESS = "en_GB.UTF-8", >>> LC_TELEPHONE = "en_GB.UTF-8", >>> LC_NAME = "en_GB.UTF-8", >>> LC_MEASUREMENT = "en_GB.UTF-8", >>> LC_IDENTIFICATION = "en_GB.UTF-8", >>> LC_NUMERIC = "en_GB.UTF-8", >>> LC_PAPER = "en_GB.UTF-8", >>> LANG = "en_GB.UTF-8" >>> perl: warning: Falling back to the standard locale ("C"). >>> >>> Anyone can help me to solve that problem? >>> >>> Kind Regards >>> >>> Ian >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/ufeNqBNCnqs/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.