Or if you want a ready to run board, available from stock, make sure to
check my BeBoPr++ ! The manual is available online.
(https://github.com/modmaker/BeBoPr-plus-plus)
-- Bas
On 23-4-2014 18:17, Lord Drachenblut wrote:
Try checking out the CRAMPS board. That might fit part of what you want
On Apr 23, 2014 11:50 AM, "Markus Osmers" <mo2...@gmail.com
<mailto:mo2...@gmail.com>> wrote:
Hey folks,
I'm just new into Beagle Bone Black and looking forward to build a
CNC-Box from scratch.
I also want to use this Controller for 3D printing so it will
actually need 3x axis support plus even one or more extruder
stepper-motor outputs an also a few PWM Outputs for fan an for
sure some temperature sensor I/Os as for the extruder an a heating
bed.
It also should come with a high power support for min. one heatbed
like the MK2 better i would be able to use two, and it needs high
voltage output for min. two hot-ends.
I found a few Creations for the Beagle Bone Black but actually
there is nothing to buy and every seen solution just not fit my needs.
So i actually come to this one:
http://igg.me/at/t-bone/x/7041114
Which will have most of the wanted features and while they make it
stackable I would be able to add as many Extruders and Outputs I like.
But even with this solution, if it get's founded, I would like to
have just some more high power switching.
Is their any soluition you would recommend to buy for building my
CNC-Box with a Beagle Bone Black.
OR does anyone has a starting point for building my own Solution
step by step.
I looked at the chips they use, they are from trinamic motion
control and able to get from retailer, so may i could build my own
test controller with those chips. I would just need the 3 CNC Axis
System for now.
And I also ordered the t-bone board which will become open
Hardware but need something for now or for an alternative when it
didn't get successfully founded.
So is anybody interested in building up a breadbord version for 3
axis controll with beagle bone black, based on the trinamic chips:
- TMC2660-PA and TMC429-LI ??
May there are some geniuses which could help build it, just cause
they can an I don't ;-)
Any suggestion would be appreciated
Thx
Markus
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
