Hello i have beaglebone black Rev A5C that works correctly with the Serial debug header
yesterday i have bought a new beaglebone black Rev A6A (new BBB) , but when i connect the serial FTDI debugger it didn't work at all there is nothing displayed on the host terminal when the new BBB boot up i have tried to connect TX with RX from the debug header of the new BBB and used minicom on the new BBB using with the following settings : ttyO0 115200N1 no hardware flow control and try to write some chars , but nothing received , i think that the FTDI debug header is not connected with the ttyO0 , i think that there is a hardware bug from the BBB factory . if what i think is true so , i have to redirect the u-boot console output to another tty like ttyO4 , but i don't know how to do that . please help . -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
