I'm not sure if you saw my original reply to this, which disappeared. In any case, I was able to max out my internet connection finally after applying the linux kernel update you suggested; before it maxed out at about 20Mbit/sec, and now I am reaching the 30Mbit/sec I pay for. However, I have a couple questions: 1. Where did you see the CPU usage of ksoftirqd? ksoftirqd does not show up in htop. 2. Have you since gained any insight into what changed between the kernel versions?
On Thursday, April 3, 2014 8:22:32 AM UTC-7, Michael Mullin wrote: > > I've setup my home with a BBB acting as a firewall/router. > > With the 3.12 kernel, I had problems in high data-volume situations > (3+MB/s DL according to my download managers). ksoftirqd would start > taking up all the processor and then my packets would be dropped. > > After upgrading to the 3.13 kernel... this problem was abated. ksoftirqd > rarely goes above 30% now. Still, I wouldn't put 150 users' data through a > BBB. > > Im a bit curious about what changed in the 3.13 kernel to give me such a > performance boost. > > On Tuesday, April 1, 2014 5:25:05 PM UTC-4, Mike Bell wrote: >> >> On 04/01/2014 05:02 PM, vignesh murali wrote: >> > I just wanted to know whether it would be a good idea to run BBB as a >> > router w/ firewall capability. I intend to use BBB with 1 WAN port and >> > 2 LAN ports(with USB to ethernet dongles) to support a total of 150 >> > users in the network. I am skeptical about the load the BBB can >> > handle with the above said numbers. Any suggestions? >> >> Wild guess... I would say the USB dongles would be where you hit the >> wall. The BBB has more than enough CPU power, RAM might become a factor >> with that many users with a lot of rules. >> >> LEAF has an ARM port for Rpi. I don't recall if it's in main or not. I >> would think the same hurdles would apply here for that number of users. >> >> Seems to me for the money a Sokeris (sp?) board or something similar >> might be more appropriate. >> >> My 2 cents worth anyway. >> >> Mike >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
