Also note that is twin die. It requires two CS lines. It also adds a second load to all the address lines and data lines. I would need to change the design to add the termination resistors. The power is still an issue as well.
Gerald On Wed, May 21, 2014 at 5:21 PM, Gerald Coley <ger...@beagleboard.org>wrote: > So, does it provide its own power? > > Gerald > > > > On Wed, May 21, 2014 at 5:19 PM, John Syn <john3...@gmail.com> wrote: > >> >> From: Gerald Coley <ger...@beagleboard.org> >> Reply-To: <beagleboard@googlegroups.com> >> Date: Wednesday, May 21, 2014 at 2:42 PM >> To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> >> Subject: Re: [beagleboard] Received my 4GB eMMC BBB >> >> 1GB? Not on that design. 512MB is the maximum. >> >> MT41K512M16TNA-125 ? >> >> It is 1mm wider, but the pin layout looks the same. >> >> Regards, >> John >> >> >> Gerald >> >> >> >> On Wed, May 21, 2014 at 3:43 PM, <dsmce...@gmail.com> wrote: >> >>> I received my 4GB eMMC BBB from Adadruit today. It's nice to have the >>> extra eMMC and of course I still have the SD card for even more solid state >>> storage. >>> >>> If there was one more item I wish I had on the BBB, it would be 1GB of >>> RAM. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.