I would actually like a design similar to this ( the beaglebone black ) with 2GB RAM.
But while I'm dreaming I think the ideal design, at least for one thing I have in mind would be 2 GbE ethernet ports, 2 GB RAM, and an SATA connection. For my own purposes this could be used as a multi purpose home network "appliance", that of course would not require a lot of interaction with the outside world ( GPIO, I2C SPI, etc ). Costs ? No idea, and in the long run my "dream" might not be worth it to pursue. On Wed, May 21, 2014 at 4:02 PM, John Syn <john3...@gmail.com> wrote: > > From: Gerald Coley <ger...@beagleboard.org> > Reply-To: <beagleboard@googlegroups.com> > Date: Wednesday, May 21, 2014 at 3:25 PM > > To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> > Subject: Re: [beagleboard] Received my 4GB eMMC BBB > > Also note that is twin die. It requires two CS lines. It also adds a > second load to all the address lines and data lines. I would need to change > the design to add the termination resistors. The power is still an issue as > well. > > Yep, I should have paid more attention. > > > Gerald > > > On Wed, May 21, 2014 at 5:21 PM, Gerald Coley <ger...@beagleboard.org>wrote: > >> So, does it provide its own power? >> >> Gerald >> >> >> >> On Wed, May 21, 2014 at 5:19 PM, John Syn <john3...@gmail.com> wrote: >> >>> >>> From: Gerald Coley <ger...@beagleboard.org> >>> Reply-To: <beagleboard@googlegroups.com> >>> Date: Wednesday, May 21, 2014 at 2:42 PM >>> To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> >>> Subject: Re: [beagleboard] Received my 4GB eMMC BBB >>> >>> 1GB? Not on that design. 512MB is the maximum. >>> >>> MT41K512M16TNA-125 ? >>> >>> It is 1mm wider, but the pin layout looks the same. >>> >>> Regards, >>> John >>> >>> >>> Gerald >>> >>> >>> >>> On Wed, May 21, 2014 at 3:43 PM, <dsmce...@gmail.com> wrote: >>> >>>> I received my 4GB eMMC BBB from Adadruit today. It's nice to have the >>>> extra eMMC and of course I still have the SD card for even more solid state >>>> storage. >>>> >>>> If there was one more item I wish I had on the BBB, it would be 1GB of >>>> RAM. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
