Hi , Robert as you suggested, I tried and below is the output tftp localhost 69 tftp> get uImage Received 5076806 bytes in 1.6 seconds tftp>
On Sunday, July 6, 2014 12:25:18 AM UTC+5:30, Gibson Justian wrote: > > Hi folks, > I am trying to boot the BBB using the tftpboot procedure > and I used the yocto openembedded build . > When I tried to transfer the image file using the tftp command in the > uboot prompt , I get the following output. > > link up on port 0, speed 100, full duplex > Using cpsw device > TFTP from server 192.168.43.130; our IP address is 192.168.43.10 > Filename 'uImage'. > Load address: 0x80200000 > Loading: T T T T T T T T T T T T T T T T T T T T > Retry count exceeded; starting again > using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in > MAC 90:59:af:62:d3:1b > HOST MAC de:ad:be:af:00:00 > RNDIS ready > ERROR: The remote end did not respond in time. > at drivers/usb/gadget/ether.c:2388/usb_eth_init() > > Any valuable suggestions or tips on this is helpful > > Regards, > Gibson > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
