Hi there, Yesterday i received the CCCC on debug UART and I have uploaded the u-boot-spl.bin and u-image.bin by UART Xterm and YTerm as per http://processors.wiki.ti.com/index.php/AM335x_U-Boot_User's_Guide . The U-boot menu comes up but if I try to flash MLO and u-boot.img to nand I receive "no nand device". Where is the NAND ?????? Here the boot log U-Boot 2014.07-rc2-00002-gf23adc9-dirty (May 25 2014 - 21:44:14) I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 U-Boot# nand device *no devices available*
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.