what board do you use?
2014-07-17 23:48 GMT+04:00 giafar <gia...@gmail.com>: > Hi there, > Yesterday i received the CCCC on debug UART and I have uploaded the > u-boot-spl.bin and u-image.bin by UART Xterm and YTerm as per > http://processors.wiki.ti.com/index.php/AM335x_U-Boot_User's_Guide . > The U-boot menu comes up but if I try to flash MLO and u-boot.img to nand > I receive "no nand device". Where is the NAND ?????? > > Here the boot log > > U-Boot 2014.07-rc2-00002-gf23adc9-dirty (May 25 2014 - 21:44:14) > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > *** Warning - readenv() failed, using default environment > Net: <ethaddr> not set. Validating first E-fuse MAC > cpsw, usb_ether > Hit any key to stop autoboot: 0 > U-Boot# nand device > *no devices available* > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- LinkedIn - http://www.linkedin.com/in/maximpodbereznyy Company - http://www.linkedin.com/company/mentorel Facebook - https://www.facebook.com/mentorel.company -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
