Hi,
I try to write some data to EEPROM of BBB out of own (bare-metal) software. Reading data works fine and code for writing should be OK too, unfortunately data are sent to EEPROM but not written. >From schematic I found EEPROMs WP-input has to be pulled to Vss so I connected TP4 of BBB with ground (pins 1/2 of P9). Unfortunately this also did not help. So...anything else that could be missing? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.