So...anything else that could be missing? > > > Hi, seems nothing is missed. In this case I'd proceed with an oscilloscope: 1) ensure the WP (U7.5) is really Low level. 2) look at the i2c diagram and ensure there is an acnowledge to (page) write operation 3) ensure there is long acnowledge delay on the second page write (otherwise the EEPROM is write protected or some other device responds with the i2c ACK!)
You say you use bare metal soft support. Are you sure your i2c diagarm is correct (correct stop condition)? If not, bytes could be read successfully but page write may not begin.. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.