I'm using an A5A with a semi most recent image. Well technically I built my own kernel, and used an alternate rootfs, but it's basically the same thing minus a lot of "bloat"
On Sun, Sep 7, 2014 at 10:24 PM, <k...@cranehome.info> wrote: > I have two older A5A boards that I'm trying to use the August/Sept > standalone SD images with. Both behave much different than the older > image (not sure which one maybe june/july) I'm using from my recently fried > Rev C board. I was able to take the backup image from that board and > write it to an SD that I inserted in an A5A board and it's mostly working. > USB gadget shows up on my Macs and power button works as it should. I've > been able to at least keep working on my project for now. > > > However, the new images I downloaded bott up and run on the A5A's but they > do not appear as a network connection when on USB and the power button does > nothing when pressed. I have to access them by USB serial. Both show the > usb0 device config in /etc/network/interfaces but neither show that present > when I run ifconfig. > > > Is A5A supported on these images? I'll be ordering a couple new Rev C > boards later on but for now I have to continue on the A5A's and I don't see > why that old image behaves perfectly while these do not. Without access > to the USB ethernet if I lose my wireless while the board is in my robot it > means dissasembly to get to it because the custom cape blocks the serial > console pins. > > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
