Hi Maxim , Thanks for the git link . I have a question ...I could see 2 u-boot.bin files generated after cross compiling with codesourcery toolchain .one is u-boot.bin and the other is located in spl/u-boot-spl.bin.
Do I need to use the MLO and u-boot-spl.bin ?? to boot the Beagleboard xm ??? Thanks in advance . Regards , Pavan On 8 September 2014 13:48, Maxim Podbereznyy <lisar...@gmail.com> wrote: > Try this > > git clone git://git.denx.de/u-boot.git > cd u-boot/ > git checkout v2014.07 -b tmp > > > > 2014-09-07 17:31 GMT+04:00 pavan B.G <bgpa...@gmail.com>: > > >> Hi Maxim , >> >> Please let me know how to proceed further ....??? >> >> On 7 September 2014 18:56, Maxim Podbereznyy <lisar...@gmail.com> wrote: >> >>> Of course! Because changing u-boot environment variables means nothing >>> for SPL bootloader :) >>> 07 Сен 2014 г. 16:11 пользователь "pavan B.G" <bgpa...@gmail.com> >>> написал: >>> >>> Hello John , >>>> >>>> I applied the patch,cross compiled U-boot and tried but its still the >>>> same ..:( >>>> >>>> >>>> Regards >>>> Pavan >>>> >>>> >>>> >>>> On 7 September 2014 13:12, John Syn <john3...@gmail.com> wrote: >>>> >>>>> >>>>> From: pavan <bgpa...@gmail.com> >>>>> Reply-To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com >>>>> > >>>>> Date: Saturday, September 6, 2014 at 11:39 PM >>>>> To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> >>>>> Subject: [beagleboard] BeagleBoard XM rev c Boot Issue >>>>> >>>>> >>>>> Hello , >>>>> >>>>> >>>>> I recently tried compiling and booting a fresh kernel and U-boot on >>>>> Beagleboard -Xm rev c , i get the following error during board bootup >>>>> >>>>> >>>>> U-Boot SPL 2014.10-rc2 (Sep 06 2014 - 18:31:00) >>>>> SPL: Please implement spl_start_uboot() for your board >>>>> SPL: Direct Linux boot not active! >>>>> reading u-boot.img >>>>> spl_load_image_fat: error reading image u-boot.img, err - -1 >>>>> ### ERROR ### Please RESET the board ### >>>>> >>>>> >>>>> Resetting the board dosen't help . >>>>> >>>>> The default angstrom distro i got from factory works very fine and the >>>>> board boots .So there is no issue with the board .Please help me regarding >>>>> this . >>>>> >>>>> I cloned the U-boot source via this *git clone >>>>> git://git.denx.de/u-boot.git <http://git.denx.de/u-boot.git> u-boot/* >>>>> >>>>> Did you patch u-boot? >>>>> >>>>> >>>>> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot >>>>> >>>>> But for the Beagle-xM you >>>>> use 0001-omap3_beagle-uEnv.txt-bootz-n-fixes.patch >>>>> >>>>> Regards, >>>>> John >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> *Thanks and regards.* >>>>> >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > LinkedIn - http://www.linkedin.com/in/maximpodbereznyy > Company - http://www.linkedin.com/company/mentorel > Facebook - https://www.facebook.com/mentorel.company > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.