Hi Maxim , I used MLO and u-boot-spl.bin and tried booting the beagle-xm ...still no luck I get the same error .
Regards Pavan On 13 September 2014 10:02, pavan B.G <bgpa...@gmail.com> wrote: > Hi Maxim , > > Thanks for the git link . I have a question ...I could see 2 u-boot.bin > files generated after cross compiling with codesourcery toolchain .one is > u-boot.bin and the other is located in spl/u-boot-spl.bin. > > Do I need to use the MLO and u-boot-spl.bin ?? to boot the Beagleboard xm > ??? Thanks in advance . > > > Regards , > Pavan > > On 8 September 2014 13:48, Maxim Podbereznyy <lisar...@gmail.com> wrote: > >> Try this >> >> git clone git://git.denx.de/u-boot.git >> cd u-boot/ >> git checkout v2014.07 -b tmp >> >> >> >> 2014-09-07 17:31 GMT+04:00 pavan B.G <bgpa...@gmail.com>: >> >> >>> Hi Maxim , >>> >>> Please let me know how to proceed further ....??? >>> >>> On 7 September 2014 18:56, Maxim Podbereznyy <lisar...@gmail.com> wrote: >>> >>>> Of course! Because changing u-boot environment variables means nothing >>>> for SPL bootloader :) >>>> 07 Сен 2014 г. 16:11 пользователь "pavan B.G" <bgpa...@gmail.com> >>>> написал: >>>> >>>> Hello John , >>>>> >>>>> I applied the patch,cross compiled U-boot and tried but its still the >>>>> same ..:( >>>>> >>>>> >>>>> Regards >>>>> Pavan >>>>> >>>>> >>>>> >>>>> On 7 September 2014 13:12, John Syn <john3...@gmail.com> wrote: >>>>> >>>>>> >>>>>> From: pavan <bgpa...@gmail.com> >>>>>> Reply-To: "beagleboard@googlegroups.com" < >>>>>> beagleboard@googlegroups.com> >>>>>> Date: Saturday, September 6, 2014 at 11:39 PM >>>>>> To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> >>>>>> Subject: [beagleboard] BeagleBoard XM rev c Boot Issue >>>>>> >>>>>> >>>>>> Hello , >>>>>> >>>>>> >>>>>> I recently tried compiling and booting a fresh kernel and U-boot on >>>>>> Beagleboard -Xm rev c , i get the following error during board bootup >>>>>> >>>>>> >>>>>> U-Boot SPL 2014.10-rc2 (Sep 06 2014 - 18:31:00) >>>>>> SPL: Please implement spl_start_uboot() for your board >>>>>> SPL: Direct Linux boot not active! >>>>>> reading u-boot.img >>>>>> spl_load_image_fat: error reading image u-boot.img, err - -1 >>>>>> ### ERROR ### Please RESET the board ### >>>>>> >>>>>> >>>>>> Resetting the board dosen't help . >>>>>> >>>>>> The default angstrom distro i got from factory works very fine and >>>>>> the board boots .So there is no issue with the board .Please help me >>>>>> regarding this . >>>>>> >>>>>> I cloned the U-boot source via this *git clone >>>>>> git://git.denx.de/u-boot.git <http://git.denx.de/u-boot.git> u-boot/* >>>>>> >>>>>> Did you patch u-boot? >>>>>> >>>>>> >>>>>> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot >>>>>> >>>>>> But for the Beagle-xM you >>>>>> use 0001-omap3_beagle-uEnv.txt-bootz-n-fixes.patch >>>>>> >>>>>> Regards, >>>>>> John >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> *Thanks and regards.* >>>>>> >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to beagleboard+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to beagleboard+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> LinkedIn - http://www.linkedin.com/in/maximpodbereznyy >> Company - http://www.linkedin.com/company/mentorel >> Facebook - https://www.facebook.com/mentorel.company >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
