Hello there, I am currently working on a motherboard for the BeagleBone Black. One of the requiments is to have a HDMI output on the side of the motherboard. I Know that there are LCD pins on the BeagleBone Black header and there is a possibility to connect a LCD cape. I was wondering either it would work to duplicate the NXP HDMI framer circuit that is on the board to the motherboard and use it for hdmi output? If I am correct the only difference would be that there is no acces to I2C0 from headers so I would have to use I2C1/2 for the NXP chip. That way at least I wont chave to worry about addressing 2 chips at once (not sure If you can change address of the hdmi framer yet).
My question is, would this solution be bard to implement in software, or is it easy to change the I2C bus config for hdmi? Are there any obstacles that I am not aware of? I would really aprichiate any help in here. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
