So, I can get config-pin to install by getting the universal-io from git #apt-get install gcc g++ make device-tree-compiler #git clone https://github.com/cdsteinkuehler/beaglebone-universal-io #cd beaglebone-universal-io/ #make #sudo make install
after that, I can change the mode of my pin PIN 8 - P8-19 gpio0[22] 22 0x820 EHRPWM2A to PWM with: #config-pin p8.19 pwm it changes the configuration, I can verify it by checking with #config-pin -q p8.19 however, I can't export the pin using: sudo cat 2 > /sys/class/pwm/export it always comes back with permission denied also, the /sys/class/pwm directory is empty, there should be something in there, right? Any ideas what I need to do to get pwm working? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.