Do I have to place this part:
dvicape {
compatible = "ti,tilcdc,tfp410";
i2c = <&i2c2>;
pinctrl-names = "default";
pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>;
powerdn-gpio = <&gpio2 31 0>;
};
In the overlay file you have provided me erlier instead of HDMI part? Or
do I have to get rid of more? I am not sure which parts exacly can go.
W dniu 2014-11-24 o 20:55, Robert Nelson pisze:
On Mon, Nov 24, 2014 at 5:28 AM, Bremenpl <breme...@gmail.com> wrote:
Some update on the progress:
I figured out that I have switched SDA and SCL lines for the monitor
connection through HDMI. I have flipped that to proper position and I can
see additional devices on the bus:
root@beaglebone:~# i2cdetect -y -r 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: 20 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: 30 -- -- -- -- -- -- 37 -- -- 3a -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- 4a 4b -- -- -- --
50: 50 -- -- -- UU UU UU UU -- -- -- -- -- -- -- --
60: -- 61 -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@beaglebone:~#
0x20 - I/O expander
0x61 - external DAC
0x68 - RTC clock
0x20, 0x37, 0x3a, 0x4a, 0x4b and 0x50 appear after I connect the monitor ro
hdmi connector.
I think I have figured out that I have to put i2c = <&i2c2>; in the overlay
file, as I think it reffers to the hardware number.
Now when I boot BeagleBone Black in the debug console I see:
.
.
.
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.338954] omap2_mbox_probe: platform not supported
[ 0.493953] tps65217-bl tps65217-bl: no platform data provided
[ 0.558115] bone-capemgr bone_capemgr.9: slot #0: No cape found
[ 0.595223] bone-capemgr bone_capemgr.9: slot #1: No cape found
[ 0.632332] bone-capemgr bone_capemgr.9: slot #2: No cape found
[ 0.662506] bone-capemgr bone_capemgr.9: bone: Invalid signature
'825a93cf' at slot 3
[ 0.670687] bone-capemgr bone_capemgr.9: slot #3: No cape found
[ 0.689417] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset'
failed
[ 0.751741] pinctrl-single 44e10800.pinmux: pin 44e10854 already
requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[ 0.763488] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status
-22
[ 0.770796] pinctrl-single 44e10800.pinmux: could not request pin 21 on
device pinctrl-single
Loading, please wait...
systemd-fsck[210]: rootfs: clean, 21580/111104 files, 121672/444160 blocks
systemd-fsck[326]: dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN
systemd-fsck[326]: /dev/mmcblk0p1: 138 files, 31622/49047 clusters
[ 6.224809] libphy: PHY 4a101000.mdio:01 not found
[ 6.229881] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 10.703450] dummy 1-0034: Error -121 writing to cec:0xff
[ 10.740063] tda998x 1-0070: Error -121 reading from 0xa
[ 10.781054] tda998x 1-0070: Error -121 writing to 0xa
[ 10.837748] tda998x 1-0070: Error -121 reading from 0xa
[ 10.861162] tda998x 1-0070: Error -121 writing to 0xa
[ 10.917824] tda998x 1-0070: Error -121 reading from 0x1
[ 10.941245] tda998x 1-0070: Error -121 writing to 0x1
[ 10.972464] tda998x 1-0070: Error -121 reading from 0x1
[ 11.003772] tda998x 1-0070: Error -121 writing to 0x1
[ 11.029803] tda998x 1-0070: Error -121 writing to REG_CURPAGE
[ 11.065182] tda998x 1-0070: Error -121 writing to 0x200
[ 11.095575] tda998x 1-0070: Error -121 writing to 0x201
[ 11.128734] tda998x 1-0070: Error -121 writing to 0x202
[ 11.165874] tda998x 1-0070: Error -121 writing to 0x203
[ 11.189995] tda998x 1-0070: Error -121 writing to 0x204
[ 11.217379] tda998x 1-0070: Error -121 writing to 0x205
[ 11.230326] tda998x 1-0070: Error -121 writing to 0x20e
[ 11.242030] tda998x 1-0070: Error -121 writing to 0x211
[ 11.253725] tda998x 1-0070: Error -121 writing to 0x207
[ 11.260694] tda998x 1-0070: Error -121 writing to 0x208
[ 11.271538] tda998x 1-0070: Error -121 writing to 0x209
[ 11.284844] tda998x 1-0070: Error -121 writing to 0x20a
[ 11.294595] tda998x 1-0070: Error -121 writing to 0x206
[ 11.305084] tda998x 1-0070: Error -121 writing to REG_CURPAGE
[ 11.313653] tda998x 1-0070: Error -121 reading from 0x0
[ 11.319751] tda998x 1-0070: Error -121 reading from 0x2
why are you still pointing to the "tda998x" driver?
https://github.com/beagleboard/linux/blob/3.8/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt#L16
Regards,
--
Bremenpl
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
