On Mon, Nov 24, 2014 at 1:52 AM, Bremenpl <breme...@gmail.com> wrote:
> In that case after the disabling I have enabled my module by hand > (BB-BONELT-HDMIN1): > > root@beaglebone:~# cat /sys/devices/bone_capemgr.9/slots > 0: 54:PF--- > 1: 55:PF--- > 2: 56:PF--- > 3: 57:PF--- > 4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G > 5: ff:P-O-- Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI > 6: ff:P-O-- Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN > 9: ff:P-O-L Override Board Name,00A0,Override Manuf,BB-BONELT-HDMIN1 > > But i still get no visual on the attached monitor :(. The monitor is in > standby so he doesnt get any signal. > :( I wish you the best of luck. It's 2am here so I'm going to bed. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.