On Fri, Nov 28, 2014 at 6:00 AM, Marco Steger <marco.st1...@gmail.com> wrote: > Hi Jason, Hi all, > > thanks for your hints. So I just used "apt-get install > linux-image-3.14.25-ti-r37" > like you preferred and it works like a charm ... After one reboot the can0 > interface was there! :) > -> So for everyone who needs a kernel >3.8: Use kernel 3.14.25-ti-r37 and > dtb-builder. For more information see [1]. > > So I will use this configurations for some tests with can0. > @Robert: Is there a plan to add dtb-rebuilder also to 3.16 kernel?
Honestly, i'm in a little bit of holding pattern till v3.19-rc1 drops... Specifically: https://lkml.org/lkml/2014/11/24/806 Which is one of the really really big frameworks that's in our v3.8.x kernel but not in mainline. But yeah, when that drops i'll extend the dtb-rebuilder, because it's very useful, and depending on the above patch-set i may restructure things.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.