...the instructions are pretty lousy. If it's incomprehensible say so. I'll help.
On Tue, Nov 25, 2014 at 1:39 AM, Jason Lange <j.b.la...@gmail.com> wrote: > this: > > https://groups.google.com/forum/#!topic/beagleboard/WuCvPyi9bqk > > suggests that you might be more interested in this: > > http://elinux.org/Beagleboard:Capes_3.8_to_3.14#Custom_dtb > > On Tue, Nov 25, 2014 at 12:55 AM, Marco Steger <marco.st1...@gmail.com> > wrote: > >> Hi again! >> >> I spent some more hours on how to enable the d_can interfaces on my BBB. >> >> I found Robert Nelsons "Really Simple Cape Manager" (RSCM) here [1]. This >> looks very promising at first. There is a folder for 3.13-bone and the >> README says that >> >> 3.13-rc6-bone2 should be installed. >> >> >> I'm currently working on 3.16.1-bone4. As far as I understand the idea >> behind Robert’s RSCM I would need the original .dts file of my BBB. >> Than add the needed lines to enable d_can1 (to enable d_can0 I would have >> to disable I2C2. Am I right?). The build a dtb file using dtc (patched by >> Robert … he is present everywhere on the BBB I think! J) . >> >> Finally I can move this file to /boot/dtbs/3.16.1-bone4/ on my BBB >> (replace the existing dtb file(s). >> >> But where can I find the dts file of my BBB? I wasn’t able to locate it >> on my board. Can I use the dts file from 3.13? Can I (permanently) damage >> my BBB when playing around here? >> >> >> >> Would be great if someone can help me!!! >> >> >> [1] https://github.com/RobertCNelson/rscm >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
