Hello All, I've just completed a fresh install of:
ubuntu-14.04.1-console-armhf-2014-10-29 on a BB-XM rev B. I ran into issues with HDMI on kernel versions above 3.2: https://groups.google.com/d/msg/beagleboard/zi6Ft6JI2OM/5wuHfHtp3f0J but because of a stupid error had to upgrade (wiped a partition on the SD card by mistake). Anyway on the new install the HDMI was working correctly, showing text on startup. I then installed LXDE & no more HDMI. 'Tux' is shown in the top left hand corner for the initial couple of seconds but then the TV gives up & shows no signal. I've edited /boot/uEnv.txt to: #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 uname_r=3.17.1-armv7-x3 #dtb= uuid=f25adba4-d22e-462e-adaf-bfb0013c91f1 #Force HDMI resolution for LG42LV550T-ZA #From: https://groups.google.com/forum/?hl=en-GB#!searchin/beagleboard/HDMI/beagleboard/TOCarHIhVI8/_UxUKnOIJ9UJ #cmdline=video=DVI-D-1:1024x768@60e cmdline=quiet But no success. I attach a PDF of the TV supported resolutions. It seems like it should work. Any ideas? Leo -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Resolutions.pdf
Description: Adobe PDF document
