On Thu, Dec 4, 2014 at 11:48 AM, Leo738 <oo.he...@gmail.com> wrote: > Hello All, > > I've just completed a fresh install of: > > ubuntu-14.04.1-console-armhf-2014-10-29 > > on a BB-XM rev B. > > I ran into issues with HDMI on kernel versions above 3.2: > > https://groups.google.com/d/msg/beagleboard/zi6Ft6JI2OM/5wuHfHtp3f0J > > but because of a stupid error had to upgrade (wiped a partition on the SD > card by mistake). > > Anyway on the new install the HDMI was working correctly, showing text on > startup. I then installed LXDE & no more HDMI. 'Tux' is shown in the top > left hand corner for the initial couple of seconds but then the TV gives up > & shows no signal. I've edited /boot/uEnv.txt to: > > #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 > > uname_r=3.17.1-armv7-x3 > > #dtb= > > uuid=f25adba4-d22e-462e-adaf-bfb0013c91f1 > > #Force HDMI resolution for LG42LV550T-ZA > #From: > https://groups.google.com/forum/?hl=en-GB#!searchin/beagleboard/HDMI/beagleboard/TOCarHIhVI8/_UxUKnOIJ9UJ > #cmdline=video=DVI-D-1:1024x768@60e > > cmdline=quiet
So from ^... Your just setting "cmdline=quiet".. if you want to force 1024x768: #cmdline=quiet cmdline=video=DVI-D-1:1024x768@60e "#" is a comment in u-boot... Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
