And so why is it that the Raspberry Pi has 4 USB ports? It is just a bit annoying almost always I end up with an extra USB hub that is almost as large as the BBB itself.
Well anyhow, good I asked, saved me from destroying two USB cables :) On Wed, Dec 17, 2014 at 9:26 AM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Wed, Dec 17, 2014 at 8:04 AM, Tommi <thomas0f...@gmail.com> wrote: >> >>> >>> Well the "slave" usb port is hard wired for slave only, so you'd also >>> have to physically modify the board.. >>> >>> >> >> That is annoying. That means basically that I am stuck with an USB hub?! >> >> PS: I really think having a couple of USB Ports should be on such a board. > > The chip's got dual ports. ;) One can be a host, the other is a slave... > > There are a few other 3rd party am335x boards with dual usb hosts. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the Google > Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/To9nktgwpfU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
