On Fri, Jan 16, 2015 at 11:46 AM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Fri, Jan 16, 2015 at 11:43 AM, Caio Marcos Malheiros Alves > <caiomar...@gmail.com> wrote: >> Hi all, >> >> I was given a BBB and a Chipsee 7" to work with. >> >> With the provided images (Angstrom, Debian and EZSDK) they boot and run and >> work fine, but with none of them I can ssh through USB into them. >> >> I've worked on the same BBB but with other LCD cape (4d systems' 4D-CAPE70T) >> that runs on original angstrom that comes with the board, and ssh was no >> problem, I was able to implement a Qt environment, remote deploy and >> everything, but not with the images provided by Chipsee. >> >> What am I missing? Is ssh enabled? I've seen dropbear stuff on the images >> but can't tell if it is enabled, running or if it is supposed to run. What >> should I look into? > > ssh over USB isn't a hardware thing, it's a software setting by > loading g_multi on startup. > > For the offical images, you can see how this is loaded on bootup here: > > https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh#L91 > > Note, it's more then just loading g_multi as udcpd or dnsmasq is used > behind the scene to set the eth ip address.
btw, the chipsee cape should be mostly supported in the newer "jessie" image: see: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Jessie_Snapshot and: http://elinux.org/Beagleboard:Capes_3.8_to_3.14#Chipsee_bbb-exp-c For /boot/uEnv.txt (dtb changes) and /etc/X11/xorg.conf change.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.