Here is a link to the readme, which details how to download the repo and execute it: https://github.com/BestFriendofDoug/PRUSS-C
For some reason, the prudebug is not recognizing the executable, even after I downloaded and untar-ed the file see error below: root@beaglebone:~/prudebug-0.25# ls -l total 184 -rw-r--r-- 1 debian debian 8698 Mar 8 2014 cmd.c -rw-r--r-- 1 root debian 1591 Mar 8 2014 cmdinput.c -rw-r--r-- 1 root root 2264 Mar 8 2014 cmdinput.o -rw-r--r-- 1 debian debian 10512 Mar 8 2014 cmd.o -rw-r--r-- 1 debian debian 7302 Mar 8 2014 da.c -rw-r--r-- 1 root root 8120 Mar 8 2014 da.o -rw-r--r-- 1 debian debian 1510 Mar 8 2014 LICENSE -rw-r--r-- 1 debian debian 136 Mar 8 2014 Makefile -rw-r--r-- 1 debian debian 6176 Mar 8 2014 printhelp.c -rw-r--r-- 1 debian debian 8484 Mar 8 2014 printhelp.o -rw-r--r-- 1 debian debian 16769 Mar 8 2014 prudbg.c -rw-r--r-- 1 debian debian 2607 Mar 8 2014 prudbg.h -rw-r--r-- 1 root root 13240 Mar 8 2014 prudbg.o -rwxr-xr-x 1 root root 41276 Mar 8 2014 prudebug -rw-r--r-- 1 debian debian 9495 Mar 8 2014 README -rw-r--r-- 1 debian debian 1238 Mar 8 2014 uio.c -rw-r--r-- 1 debian debian 549 Mar 8 2014 uio.h -rw-r--r-- 1 root root 2016 Mar 8 2014 uio.o root@beaglebone:~/prudebug-0.25# sudo ./prudebug sudo: unable to execute ./prudebug: No such file or directory On Friday, March 6, 2015 at 4:19:23 PM UTC-6, Jason Kridner wrote: > > That URL doesn't point to the source code. Can you simplify the > step-by-step a bit further. > > I'm curious if http://sourceforge.net/projects/prudebug/ would help know > that your code is properly loaded and running. > > On Fri, Mar 6, 2015 at 3:14 PM, Karl Anderson <anderso...@gmail.com > <javascript:>> wrote: > >> I am trying to run the example blinkled project shown at >> https://github.com/BestFriendofDoug/PRUSS-C/tree/master/am335x_pru_package/pru_sw/app_loader/lib >> >> but I am not getting any output to the GPIO pins. I have set up the dto to >> output P9.12, and the blinkled.c is using StarterWare programs to toggle >> P9.12, but there is no output to the pins when the program runs. >> >> The git repo should have everything you need. I occasionally get the >> below error: >> ./blinkled >> >> INFO: Starting PRU_memAccess_DDR_PRUsharedRAM example. >> INFO: Initializing example. >> ./blinkled: symbol lookup error: ./blinkled: undefined symbol: >> prussdrv_load_datafile >> >> Which was solved for me when re-running the Makefile in >> /root/PRUSS-C/am335x_pru_package/app_loader/interface >> >> Any help on this issue would be appreciated!! >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.