Okay thank you. I guess, I will look into the direction of why it isn't connecting to the internet. But I haven't tried to connect it to the internet before. Only my computer. I have been able to connect it with my Linux desktop Ubuntu 14.04. And upload a .cpp file on it. But for the next step, I wanted to try to access the GIOP using Python and Python's libraries.
Is it a separate step to connect the beagle to the internet when it is connected through the cable with the computer? On Sun, May 3, 2015 at 12:12 AM, William Hermans <yyrk...@gmail.com> wrote: > Sorry . . . your problem has nothing to do with any of your questions > . Your beaglebone simply can not access the internet. For which there are > a few possibilities. The most common problem I've seen is resolv.conf's > nameserver attribute being set wrong for the network the BBB is on. But we > can get to the other potential problem if / when needed. > > On Sat, May 2, 2015 at 12:06 PM, William Hermans <yyrk...@gmail.com> > wrote: > >> Also is this a REVC BBB from element14 ? what is the output of the >> command: >> >> *cat /etc/dogtag* >> >> On Sat, May 2, 2015 at 12:00 PM, William Hermans <yyrk...@gmail.com> >> wrote: >> >>> Nova Jack, >>> >>> the nameserver listing in your */etc/resolv.conf* file should reflect a >>> valid nameserver for your network. The default value is usually >>> 192.168.1.1.If you do not know what this is, it is normally your internal >>> routers address. You can also use an external nameserver such as 8.8.8.8 or >>> 8.8.4.4. >>> >>> However the external nameserver IPs I mentioned above belong to google, >>> and typically they like to monitor your every move on the web. Opening >>> sometimes up to 10 connections for whatever reason to a system that uses >>> their nameservers . . .If that is important to you . . . >>> >>> On Sat, May 2, 2015 at 11:48 AM, evilwulfie <evilwul...@gmail.com> >>> wrote: >>> >>>> u said ethernet only >>>> >>>> ethernet is dhcp from your router or static ip >>>> >>>> >>>> On 5/2/2015 9:13 AM, Dieter Wirz wrote: >>>> > On Sat, May 2, 2015 at 5:01 PM, Mehreen Qayas <mehrqa...@gmail.com> >>>> wrote: >>>> >> It is connected through Ethernet cable only. I used the SSH >>>> root@192.168.7.2 >>>> >> in the Ubuntu terminal to connect to this remote system. >>>> > 192.168.7.2 you get usually when connecting over USB. is this a typo? >>>> > >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/OUBZPiPualc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.