> > *Which board do you have, and which image are you trying to flash ?* >
Never mind that question. You have either and A5A or an REVB based on the distro you mentioned "Angstrom". Make sure you're not trying to use a REVC 4GB image. It should be marked on the ewiki page. On Mon, May 18, 2015 at 6:43 PM, William Hermans <yyrk...@gmail.com> wrote: > copy / paste with putty is: > > 1) Select the text you wish to copy with the mouse. > 2) left click the selection. > > Be careful not to right click in the putty window when you have something > in the clipboard, as this will put whatever is in the clipboard into the > prompt, and putty will process return + newlines as if you pressed <enter> > on the keyboard . . . depending on what you have in the clipboard this can > be dangerous. > > Which board do you have, and which image are you trying to flash ? > > On Mon, May 18, 2015 at 6:25 PM, Jack Fisher <lotusf...@gmail.com> wrote: > >> Getting a "not enough memory on device (28)" message repeatedly at the >> end when it switches from cylon flashing to fast double flash. I was >> surveilling through the 3.3 FTDI cable, hopefully the observation was not >> the root of the problem. I will try one more time without the FTDI cable >> and see if it makes a difference, then I suppose I will try to re-download >> the flasher image and re-unpack it... >> >> I would have included more of the output than this dim recollection, but >> Putty does not seem to support select and copy... >> >> Any better suggestions? >> >> I guess I can get the board working with an SD boot system rather than >> flashing the EMMC, but that doesn't really get me where I want to and >> should be able to go, >> >> Regards and thanks in advance, >> >> Jack >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
