Nothing to forget when flashing the eMMC in this case really . . . Also, the error he is showing is not exclusive to him only. rsync timing out after 60 seconds.
On Thu, May 28, 2015 at 10:12 AM, evilwulfie <evilwul...@gmail.com> wrote: > Doing some searching your board comes from element14. they are made in > china. > so far they have good quality control, my 3 were flawless. > > you may be forgetting something. the board is open source. any number of > people can build them and sell them > if you are having specific issues with a hardware failure you need to > contact the person you purchased them from > or try roberts new images that work with any SD card. > > > > > On 5/28/2015 9:58 AM, Dennis Kerrisk wrote: > > > Amazon.com > > Dennis > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.