OK. The fix it in Starterware. Be sure an enable the reset function in eMMC and set the reset line.
Gerald On Fri, Jun 26, 2015 at 9:11 AM, mohit hada <mohit....@gmail.com> wrote: > More so, I want to configure all bare metal using starterware... > > On Fri, Jun 26, 2015 at 7:40 PM, mohit hada <mohit....@gmail.com> wrote: > >> Hi, >> >> By changing the SYSBOOT configuration on the hardware of BBB, Booting >> will start from GPMC is what I know but will the physical connections of >> eMMC cause any trouble still at electrical level? Or NOT ..... once the >> SYSBOOT is reconfigured, things should work perfectly if the custom board >> is fine is it what you mean? >> >> The reason I repeat is TI people, BISER from sitaraware informed me that >> eMMC card should be removed anyhow. >> >> I will be more than happy if it works... >> >> On Fri, Jun 26, 2015 at 7:34 PM, Gerald Coley <ger...@beagleboard.org> >> wrote: >> >>> Device Tree. It is what sets up the pin mux function of all the pins. >>> You will need to reconfigure the pins to support the module instead of the >>> onboard eMMC. >>> >>> Gerald >>> ] >>> >>> On Fri, Jun 26, 2015 at 9:01 AM, mohit hada <mohit....@gmail.com> wrote: >>> >>>> What is DT File? Please do not mind my ignorance. >>>> >>>> Regards. >>>> >>>> On Fri, Jun 26, 2015 at 7:27 PM, Gerald Coley <ger...@beagleboard.org> >>>> wrote: >>>> >>>>> It will work with either one. The BBB needs to have the DT file set to >>>>> disable the eMMC. >>>>> >>>>> Gerald >>>>> >>>>> >>>>> On Fri, Jun 26, 2015 at 8:30 AM, mohit hada <mohit....@gmail.com> >>>>> wrote: >>>>> >>>>>> Hi Gerald, >>>>>> >>>>>> Thanks for the reply. But can it be used with BBB or only with BB >>>>>> White? >>>>>> >>>>>> I have BBB and not BB White but I want to add something of this sort >>>>>> on it. >>>>>> >>>>>> Regards. >>>>>> >>>>>> On Fri, Jun 26, 2015 at 6:46 PM, Gerald Coley <ger...@beagleboard.org >>>>>> > wrote: >>>>>> >>>>>>> Yes. There is a cape for adding memory and a NOR module. >>>>>>> http://elinux.org/Beagleboard:BeagleBone_Capes >>>>>>> >>>>>>> >>>>>>> Gerald >>>>>>> >>>>>>> On Fri, Jun 26, 2015 at 3:33 AM, mohit hada <mohit....@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Read all the post as BBB instead of Beagle Bone Please. Thanks for >>>>>>>> patience. >>>>>>>> >>>>>>>> >>>>>>>> On Friday, 26 June 2015 13:24:36 UTC+5:30, mohit hada wrote: >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> >>>>>>>>> Can I do GPMC XIP parallel NOR boot using Beagle Bone by using the >>>>>>>>> expansion headers of the beagle bone and making my own custom board >>>>>>>>> for NOR >>>>>>>>> / OTP Flash and check it. >>>>>>>>> >>>>>>>>> >>>>>>>>> What can be the probable issues which I can face in doing this as >>>>>>>>> most of the header signals are shared on BBB? When I discussed this >>>>>>>>> on TI >>>>>>>>> community, I received a reply that eMMC chip in that case needs to be >>>>>>>>> removed. Is it essential to Remove eMMC. Can't it be erased and then >>>>>>>>> hardware lines used in parallel? Can other shared lines used on the >>>>>>>>> expander head for GPMC also create problem. >>>>>>>>> >>>>>>>>> >>>>>>>>> I want to use MUX1 or MUX2 XIP Boot Mode, 16 bit Address Data >>>>>>>>> Multiplexed, with an OTP / Parallel NOR Flash booting. >>>>>>>>> >>>>>>>>> >>>>>>>>> Kindly help as this will help me to reduce m design time and cost >>>>>>>>> to a minimum. >>>>>>>>> >>>>>>>>> >>>>>>>>> Regards. >>>>>>>>> >>>>>>>> -- >>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>> --- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "BeagleBoard" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to beagleboard+unsubscr...@googlegroups.com. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Gerald >>>>>>> >>>>>>> ger...@beagleboard.org >>>>>>> http://beagleboard.org/ >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to beagleboard+unsubscr...@googlegroups.com. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Mohit Hada (Proprietor) >>>>>> >>>>>> TECHNID SOLUTIONS >>>>>> #7, 3rd Floor. >>>>>> 73, Ashutosh Mukherjee Road. >>>>>> Kolkata - 700025. >>>>>> >>>>>> Contact Details : 08820074382. >>>>>> Web Address: www.technidsolutions.com >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to beagleboard+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Gerald >>>>> >>>>> ger...@beagleboard.org >>>>> http://beagleboard.org/ >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> >>>> >>>> -- >>>> Mohit Hada (Proprietor) >>>> >>>> TECHNID SOLUTIONS >>>> #7, 3rd Floor. >>>> 73, Ashutosh Mukherjee Road. >>>> Kolkata - 700025. >>>> >>>> Contact Details : 08820074382. >>>> Web Address: www.technidsolutions.com >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> Gerald >>> >>> ger...@beagleboard.org >>> http://beagleboard.org/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Mohit Hada (Proprietor) >> >> TECHNID SOLUTIONS >> #7, 3rd Floor. >> 73, Ashutosh Mukherjee Road. >> Kolkata - 700025. >> >> Contact Details : 08820074382. >> Web Address: www.technidsolutions.com >> > > > > -- > Mohit Hada (Proprietor) > > TECHNID SOLUTIONS > #7, 3rd Floor. > 73, Ashutosh Mukherjee Road. > Kolkata - 700025. > > Contact Details : 08820074382. > Web Address: www.technidsolutions.com > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.