emmc card can't be removed. Did you mean SD card has to be removed?
Sysboot will ensure that BOOT-ROM will setup the peripheral/pinmux
rightly to boot from that medium. But after the OS starts it might have
its own set of pinmux which needs to be set rightly to access that medium.
cheers,
-roger
On 26/06/15 17:10, mohit hada wrote:
Hi,
By changing the SYSBOOT configuration on the hardware of BBB, Booting
will start from GPMC is what I know but will the physical connections of
eMMC cause any trouble still at electrical level? Or NOT ..... once the
SYSBOOT is reconfigured, things should work perfectly if the custom
board is fine is it what you mean?
The reason I repeat is TI people, BISER from sitaraware informed me that
eMMC card should be removed anyhow.
I will be more than happy if it works...
On Fri, Jun 26, 2015 at 7:34 PM, Gerald Coley <ger...@beagleboard.org
<mailto:ger...@beagleboard.org>> wrote:
Device Tree. It is what sets up the pin mux function of all the
pins. You will need to reconfigure the pins to support the module
instead of the onboard eMMC.
Gerald
]
On Fri, Jun 26, 2015 at 9:01 AM, mohit hada <mohit....@gmail.com
<mailto:mohit....@gmail.com>> wrote:
What is DT File? Please do not mind my ignorance.
Regards.
On Fri, Jun 26, 2015 at 7:27 PM, Gerald Coley
<ger...@beagleboard.org <mailto:ger...@beagleboard.org>> wrote:
It will work with either one. The BBB needs to have the DT
file set to disable the eMMC.
Gerald
On Fri, Jun 26, 2015 at 8:30 AM, mohit hada
<mohit....@gmail.com <mailto:mohit....@gmail.com>> wrote:
Hi Gerald,
Thanks for the reply. But can it be used with BBB or
only with BB White?
I have BBB and not BB White but I want to add something
of this sort on it.
Regards.
On Fri, Jun 26, 2015 at 6:46 PM, Gerald Coley
<ger...@beagleboard.org <mailto:ger...@beagleboard.org>>
wrote:
Yes. There is a cape for adding memory and a NOR
module. http://elinux.org/Beagleboard:BeagleBone_Capes
Gerald
On Fri, Jun 26, 2015 at 3:33 AM, mohit hada
<mohit....@gmail.com <mailto:mohit....@gmail.com>>
wrote:
Read all the post as BBB instead of Beagle Bone
Please. Thanks for patience.
On Friday, 26 June 2015 13:24:36 UTC+5:30, mohit
hada wrote:
Hi,
Can I do GPMC XIP parallel NOR boot using
Beagle Bone by using the expansion headers
of the beagle bone and making my own custom
board for NOR / OTP Flash and check it.
What can be the probable issues which I can
face in doing this as most of the header
signals are shared on BBB? When I discussed
this on TI community, I received a reply
that eMMC chip in that case needs to be
removed. Is it essential to Remove eMMC.
Can't it be erased and then hardware lines
used in parallel? Can other shared lines
used on the expander head for GPMC also
create problem.
I want to use MUX1 or MUX2 XIP Boot Mode, 16
bit Address Data Multiplexed, with an OTP /
Parallel NOR Flash booting.
Kindly help as this will help me to reduce m
design time and cost to a minimum.
Regards.
--
For more options, visit
http://beagleboard.org/discuss
---
You received this message because you are
subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit
https://groups.google.com/d/optout.
--
Gerald
ger...@beagleboard.org <mailto:ger...@beagleboard.org>
http://beagleboard.org/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving
emails from it, send an email to
beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit
https://groups.google.com/d/optout.
--
**Mohit Hada (Proprietor)
TECHNID SOLUTIONS
#7, 3rd Floor.
73, Ashutosh Mukherjee Road.
Kolkata - 700025.
Contact Details : 08820074382.
Web Address:www.technidsolutions.com
<http://www.technidsolutions.com>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to
the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to
beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
Gerald
ger...@beagleboard.org <mailto:ger...@beagleboard.org>
http://beagleboard.org/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the
Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to
beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
**Mohit Hada (Proprietor)
TECHNID SOLUTIONS
#7, 3rd Floor.
73, Ashutosh Mukherjee Road.
Kolkata - 700025.
Contact Details : 08820074382.
Web Address:www.technidsolutions.com
<http://www.technidsolutions.com>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the
Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
Gerald
ger...@beagleboard.org <mailto:ger...@beagleboard.org>
http://beagleboard.org/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
**Mohit Hada (Proprietor)
TECHNID SOLUTIONS
#7, 3rd Floor.
73, Ashutosh Mukherjee Road.
Kolkata - 700025.
Contact Details : 08820074382.
Web Address:www.technidsolutions.com <http://www.technidsolutions.com>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
