Thanks Robert,
I’ve just reflashed it again with the latest Jessie image and will run through those steps. One thing not 100% clear in the steps is the best location to get the latest (patched) DTC, there are many differing sources it seems! Lee On Tue, Oct 13, 2015 at 4:18 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Tue, Oct 13, 2015 at 10:09 AM, Lee Armstrong <l...@pinkfroot.com> wrote: >> Thanks Robert, >> >> BB-UART4-00A0.dtbo is present in /lib/firmware. I’ve not had an issue >> before but this is a freshly flashed Jessie BBB. >> >> dmesg shows the following which is the same error as per the first post when >> echoing into the slots. >> >> [ 4.968908] __of_adjust_tree_phandle_references: Could not find target >> property 'fixup' @/__local_f >> ixups__ >> [ 4.979738] bone_capemgr bone_capemgr: slot #4: Failed to resolve tree >> [ 4.987236] bone_capemgr bone_capemgr: loader: failed to load slot-4 >> BB-UART4:00A0 (prio 0) > That means you have the wrong dtc compiler.. > You need to re-do step 2 & 3: > https://github.com/beagleboard/bb.org-overlays/blob/master/readme.md > (i just updated the readme.md to make it more useful... (i think..)) > Regards, > -- > Robert Nelson > https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.