Hi guys I try to send again this topic , so if this is a duplicate I apologize
I am following this guide: installing-xenomai-on-beaglebone-using-debian-distribution <https://randomlinuxhacks.wordpress.com/2015/02/22/installing-xenomai-on-beaglebone-using-debian-distribution/comment-page-1/#comment-19> They use a bone-debian-7.5-2014-05-14-2gb.img.xz. So they have two partition on the SD card Image 1) boot partition with zImage files ,they change original debian zImage with xenomai zImage 2) rootfs partition I try to use a 2015 debian image: bone-debian-7.8-2015-03-01-2gb.img.xz But I have only a single partition , with a boot folder, in which I have no zImage So how could I boot xenomai ? I followed another way: build an image. I tryed the github.com/beagleboard/image-builder form RobertCNelson , but I obtain, with a 2015 image, a single SD partition. Could you tell me how to configure image-builder to build a separated boot partition with the image-builder ? ( 2015 debian image 3.8 kernel) Thanks a lot. Matt -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
