Oh, and right, once installed, reboot the board ;) On Sun, Oct 18, 2015 at 8:27 AM, William Hermans <yyrk...@gmail.com> wrote:
> $ sudo apt-get update > $ sudo apt-cache search linux-image |grep xenomai > . . . > linux-image-3.8.13-xenomai-r67 - Linux kernel, version 3.8.13-xenomai-r67 > linux-image-3.8.13-xenomai-r69 - Linux kernel, version 3.8.13-xenomai-r69 > linux-image-3.8.13-xenomai-r70 - Linux kernel, version 3.8.13-xenomai-r70 > linux-image-3.8.13-xenomai-r71 - Linux kernel, version 3.8.13-xenomai-r71 > linux-image-3.8.13-xenomai-r72 - Linux kernel, version 3.8.13-xenomai-r72 > linux-image-3.8.13-xenomai-r76 - Linux kernel, version 3.8.13-xenomai-r76 > linux-image-3.8.13-xenomai-r78 - Linux kernel, version 3.8.13-xenomai-r78 > > To install: > $ sudo apt-get install linux-image-3.8.13-xenomai-rxx > > ^^ much easier > > > On Sun, Oct 18, 2015 at 8:08 AM, Matteo Loda <lodamat...@gmail.com> wrote: > >> Hi guys >> >> I try to send again this topic , so if this is a duplicate I apologize >> >> I am following this guide: >> installing-xenomai-on-beaglebone-using-debian-distribution >> <https://randomlinuxhacks.wordpress.com/2015/02/22/installing-xenomai-on-beaglebone-using-debian-distribution/comment-page-1/#comment-19> >> >> They use a bone-debian-7.5-2014-05-14-2gb.img.xz. >> >> So they have two partition on the SD card Image >> >> 1) boot partition with zImage files ,they change original debian zImage >> with xenomai zImage >> 2) rootfs partition >> >> I try to use a 2015 debian image: bone-debian-7.8-2015-03-01-2gb.img.xz >> >> But I have only a single partition , with a boot folder, in which I have >> no zImage >> >> So how could I boot xenomai ? >> >> I followed another way: build an image. >> >> I tryed the github.com/beagleboard/image-builder form RobertCNelson , >> but I obtain, with a 2015 image, a single SD partition. >> >> Could you tell me how to configure image-builder to build a separated >> boot partition with the image-builder ? ( 2015 debian image 3.8 kernel) >> >> Thanks a lot. >> >> Matt >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
