Hi, I Also have exactly same behavior with my Rev C BBB.
@Gerald: I tried RMA twice but i did not got any response !! I got the Board from Sumeet Online shop which is listed on beagleboard.org for Indian buyers. Any thoughts? Thanks & Regards Mahesh On Wednesday, November 5, 2014 at 2:29:00 AM UTC+5:30, Shu Liu wrote: > > Hi, > > There should be a short on board. The U2 shuts itself down to prevent the > high current draw which is caused by the short. That is why the LED goes > off after it blinks once. > > Regards, > Shu > > On Monday, October 27, 2014 10:56:34 PM UTC-5, s...@kopi-d.com wrote: >> >> I am in the same situation. Was trying out new images. Did an forced SD >> change to a non-bootable bbb. Now it won't boot. Just a pwr blink then >> dead. >> >> Are there any other ways to recover other than RMA? PMIC replacement or >> reflashing of bootloader? >> >> Sam >> >> On Wednesday, June 18, 2014 9:53:25 PM UTC+8, Gerald wrote: >>> >>> Request an RMA. >>> >>> http://beagleboard.org/Support/RMA >>> >>> And read this. >>> http://www.elinux.org/Beagleboard:BeagleBoneBlack#Hardware >>> >>> Gerald >>> >>> >>> On Mon, Jun 9, 2014 at 5:54 PM, <v...@victor.so> wrote: >>> >>>> My BBB (A5A) was working fine with ARM Arch (installed on the eMMC), >>>> but since yesterday it won't turn on. I don't know what changed. >>>> >>>> When I plug the power source or the USB cable the PWR Led quickly >>>> blinks, but the board doesn't turn on. >>>> If I press the POWER button, the PWR led does a single blink too, but >>>> it doesn't proceed to boot. >>>> >>>> I also tried to boot from the SD card, but It didn't work. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
