On Mon, Nov 9, 2015 at 12:45 PM, Davide Picchi <pave...@gmail.com> wrote: >> 4.1-ti supports overlays, so you can either do it like "3.8". >> >> >> https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-UART1-00A0.dts >> >> or create a custom *.dtb > > > That's nice, > but I cannot find any guide that helps me to install the new cape like in > the first tutorial I posted above. > > How do I use such overlays? > https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-UART1-00A0.dts > > Should I copy them somewhere?
Follow steps 1 -> 3: https://github.com/beagleboard/bb.org-overlays/blob/master/readme.md Then either: sudo sh -c "echo 'BB-UART1' > /sys/devices/platform/bone_capemgr/slots" or: /boot/uEnv.txt cape_enable=bone_capemgr.enable_partno=BB-UART1 Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.