http://www.embeddedhobbyist.com/2015/09/beaglebone-black-updating-device-tree-files/
On Mon, Nov 9, 2015 at 11:48 AM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Mon, Nov 9, 2015 at 12:45 PM, Davide Picchi <pave...@gmail.com> wrote: > >> 4.1-ti supports overlays, so you can either do it like "3.8". > >> > >> > >> > https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-UART1-00A0.dts > >> > >> or create a custom *.dtb > > > > > > That's nice, > > but I cannot find any guide that helps me to install the new cape like in > > the first tutorial I posted above. > > > > How do I use such overlays? > > > https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-UART1-00A0.dts > > > > Should I copy them somewhere? > > Follow steps 1 -> 3: > > https://github.com/beagleboard/bb.org-overlays/blob/master/readme.md > > Then either: > > sudo sh -c "echo 'BB-UART1' > /sys/devices/platform/bone_capemgr/slots" > > or: > > /boot/uEnv.txt > > cape_enable=bone_capemgr.enable_partno=BB-UART1 > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
