5.25V is a little high and in reality it may be even higher on power up.
The spec is 5V. I suggest you try and meet the specification and get a good
power supply.

Another possibility is that while the supply is rated at 3A, it may have a
surge limiting function based on the product it was designed for. It could
be that as the board powers up and the current increases, it increases to
fast causing the power supply to shut down. I cannot say that is the case
or not based on a video.

Also, based on the video you need t plug in the power jack., not wiggle it
in. Just plug in in firmly.

Gerald


On Fri, Dec 4, 2015 at 10:35 PM, ril3y <rileypor...@gmail.com> wrote:

> Hey Everyone.
>
>
> I need to use the 5v rails for about 300-400 miliamps so after doing a
> bunch of reading I found out that I could pull this from the 5v rail IF I
> used an external power adapter.
>
> I found one on amazon and got it here today.  Its 5v @3 amps.  I check it
> out and it looks to be about at 5.25V.  Here is a video of what is
> happening.
> https://goo.gl/photos/4fnzHVykRxVvgosB7
>
> It looks like it turns on.. the user leds light up then everything just
> fails.  I am not sure what the issue is.  I have tried 2 different BBB's
> and both exhibit the exact same behavior.
>
> Thanks everyone.
>
> Riley
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>



-- 
Gerald

ger...@beagleboard.org
http://beagleboard.org/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to