ok, then maybe some of the things I used to do as a tech will help. I used to use the ole finger on critical parts in the area of question and see what/if something changes. This was easier to see on/with analog systems but digital streaming or debug looping could be used for digital circuits. And done leave out capacitors but I would address components in a logical fashion to help isolate was was just added capacitance to the circuit and what was solder joint issues.
I also used a spray can to freeze/cool areas to see if components were susceptible to temp changes and out of spec or on edge of failure. Doug -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
