I have been at this for many of hours now. I am running Angstrom with the 3.8 kernel on BeagleBone Black
I edited the /boot/uEnv.txt file with the appropriate way to disable the HDMI. I have also tried about another half a dozen slightly different variations. optargs=quiet capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN However, after reboot the HDMI is still enabled. cat /sys/devices/bone_capemgr.8/slots 0: 54:PF--- 1: 55:PF--- 2: 56:PF--- 3: 57:PF--- 4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G 5: ff:P-O-L Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI As can be seen by the L, the HDMI cape is still enabled which prevents me from enabling my new cape that will reorganized some pins on the HDMI output for GPIO control. When trying to load the new cape, it claims the file already exists. This is what led me to the HDMI cape not being properly disabled. Everything leads me to believe that I am doing this correctly but haven't reached a conclusion or had any results. Thanks, Tyler -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
