Hi,
Did you make any progress on that ? I have the same cape and would also
like to use it with a standard kernel.
Regards,
Xav
Le lundi 24 août 2015 04:53:24 UTC+2, Ridemywideglide a écrit :
>
> I'll read-up on copying my kernel config (greek at this point), but my
> main issue is the setup of the database, the web front end and all the
> related stuff with temp measuring and liquid levels that report to the
> webserver that's setup, that I'm worried about... I'm not "friendly" with
> this OS, so that has been a ton of work for me to piece together from
> others workings..
>
> I looked at the uEnv on the waveshare image and did see tons of
> differences, know enough to know that copying them into mine isn't going to
> make things just work. I really need to get a "linux for dummies" book..
> I'm very far behind the curve with this...
>
> Thanks for the help.
> Brad
>
> On Sunday, August 23, 2015 at 6:45:19 PM UTC-6, RobertCNelson wrote:
>>
>> On Sun, Aug 23, 2015 at 6:37 PM, Ridemywideglide <ridgw...@gmail.com>
>> wrote:
>> > I'm needing some help, as I have very limited experience with linux.
>> I've
>> > had a BBB for a few months now, and managed to cobble together many
>> > different items from google searches and sites like this one, and am
>> working
>> > towards a functional touch screen beer brewing controller.
>> > After getting to where I am now, I purchased a 7in touchscreen from
>> ebay
>> > (china) that is a waveshare cape/lcd package.
>> > Waveshare has a debian image that I have downloaded, and it boots right
>> up
>> > to a working screen, but only runs from the card, no flasher. Trouble
>> is, I
>> > have lots of hours into the BBB setup I'm running now, and would of
>> course,
>> > rather not start over. I'm needing to get the LCD to work on my
>> existing
>> > system.
>> >
>> > Running wheezy, kernal 3.8.13-bone74,
>>
>> So i'd start with copying your "working" kernel config and copy it to
>> the "working" debian setup..
>>
>> http://www.waveshare.com/wiki/BB_Black_XXX_CAPE_Source_Code
>>
>> I don't see that anyone has submited support for that lcd for the
>> commuinty..
>>
>> https://github.com/beagleboard/linux/tree/3.8/firmware/capes
>>
>> Looking at the schematic, it would be a pretty simplistic compared to
>> other capes for new users to port. ;)
>>
>> Regards,
>>
>> --
>> Robert Nelson
>> https://rcn-ee.com/
>>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
