I would ask Jason Kridner to make the codification. Gerald
On Tue, Jan 5, 2016 at 12:55 PM, Ray Madigan <raymond.madi...@gmail.com> wrote: > > > On Tuesday, January 5, 2016 at 10:12:04 AM UTC-8, RobertCNelson wrote: > >> On Tue, Jan 5, 2016 at 12:05 PM, Ray Madigan <raymond...@gmail.com> >> wrote: >> > I have two Rev B beaglebone blacks. One I never used since I bought it. >> I >> > recently ordered a Rev C to use for my project but I thought I might as >> well >> > try to make some use the one I have never used. I wanted to put Debian >> 7.5 >> > on the device so it would be similar to the one I will get in a couple >> of >> > days. >> > >> > I first booted the device with the factory installed Angstrom >> distribution. >> > It worked well. >> > I then downloaded the image from http://beagleboard.org/latest-images >> > >> > I downloaded >> > >> > Older Debian images >> > BeagleBone Black (eMMC flasher) >> > Debian 7.5 (BeagleBone Black - 2GB eMMC) 2014-05-14 - more info - >> bittorrent >> > - md5: 74615fb680af8f252c034d3807c9b4ae >> > >> > >> > >> > I put the image on a microSd card, held the boot button down until it >> > started to echo info to the display >> > >> > It booted and the screen showed in red letters that it was a temporary >> > installation and I needed to flash to the eMMC. I used the terminal >> program >> > and it seemed to work. I didn't have time to flash it so I shut it >> down. >> >> >> You shutdown mid flash... So it never completed the eMMC install, so >> >> yeah, you have to reflash now... >> >> >> Here is the latest "stable" 7.x-wheezy/3.8 kernel/2GB: >> >> >> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBB.2FBBG_.28All_Revs.29_eMMC_Flashers >> <http://www.google.com/url?q=http%3A%2F%2Felinux.org%2FBeagleboard%3ABeagleBoneBlack_Debian%23BBB.2FBBG_.28All_Revs.29_eMMC_Flashers&sa=D&sntz=1&usg=AFQjCNGsDW_xPydCCOp5vncsa7u83SGx_Q> >> >> >> btw, we nuked this method, now you users don't get a temp session to >> >> play around anymore, everyone has to wait and watch the flashing >> >> process ;) >> >> > This is great, I really appreciate your help. > > I wish I had known that it was flashing. Some link sent me to this page: > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC > > which told me I had to edit a file and reflash. > > To setup the standalone microSD image to automatically flash the eMMC on >> powerup.In /boot/uEnv.txt: > > ##enable BBB: eMMC Flasher: > cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh > > > If this is no longer valid is there something I can do to modify the page? > > > A couple of hours later I went back to try it again and it would not >> boot >> > the original Angstrom, the blue led's all stay on and nothing happens. >> If I >> > try to load the Debian image I get 3 lines on the display that I will >> post >> > next. >> > >> > [25.132791] libphy: PHY 4a101000.mdio:01 not found >> > [25.137954] net etho: phy 4a101000.mdio.01 not found on slave 1 >> > [28.305991] tilcdc 4830e000.fb: timeout waiting framedone >> > >> > Then it waits a period and seems go go to neverlnd. The display >> responds >> > that it has lost its signal. >> > >> > Any help would be useful. >> > >> > Useful responses might be something like: >> > >> > Sorry dude, your device is now bricked. >> > or >> > Maybe you can get better response here >> > or >> > Advice on how to reset the device or something. >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
