So here is a silly question. Are you sure /dev/mmcblk0p3 even exists ? because mmcblk0 on the beaglebone black would be the eMMC . . .
On Tue, Mar 8, 2016 at 6:57 PM, <printe...@chromium.org> wrote: > I'm trying to boot the 4.4.3 kernel from > https://github.com/beagleboard/linux/tree/4.4 on a beaglebone white and > the kernel stops the boot after 'Waiting for root device' > > The MMC* and REGULATOR* options are enabled: > CONFIG_MMC=y > CONFIG_MMC_BLOCK=y > CONFIG_MMC_BLOCK_MINORS=16 > CONFIG_MMC_BLOCK_BOUNCE=y > CONFIG_MMC_OMAP=y > CONFIG_MMC_OMAP_HS=y > CONFIG_REGULATOR=y > CONFIG_REGULATOR_FIXED_VOLTAGE=y > CONFIG_REGULATOR_USERSPACE_CONSUMER=y > CONFIG_REGULATOR_ACT8865=m > CONFIG_REGULATOR_ANATOP=y > CONFIG_REGULATOR_AS3722=y > CONFIG_REGULATOR_AXP20X=y > CONFIG_REGULATOR_DA9052=y > CONFIG_REGULATOR_DA9063=y > CONFIG_REGULATOR_FAN53555=m > CONFIG_REGULATOR_GPIO=y > CONFIG_REGULATOR_MC13XXX_CORE=m > CONFIG_REGULATOR_MC13783=m > CONFIG_REGULATOR_MC13892=m > CONFIG_REGULATOR_MT6311=y > CONFIG_REGULATOR_PALMAS=y > CONFIG_REGULATOR_PBIAS=y > CONFIG_REGULATOR_PFUZE100=y > CONFIG_REGULATOR_PWM=y > CONFIG_REGULATOR_S2MPA01=m > CONFIG_REGULATOR_S2MPS11=m > CONFIG_REGULATOR_S5M8767=m > CONFIG_REGULATOR_TI_ABB=y > CONFIG_REGULATOR_TPS65023=y > CONFIG_REGULATOR_TPS6507X=y > CONFIG_REGULATOR_TPS65217=y > CONFIG_REGULATOR_TPS65218=y > CONFIG_REGULATOR_TPS65910=y > CONFIG_REGULATOR_TWL4030=y > CONFIG_REGULATOR_VEXPRESS=m > > The config is generated from bb.org_defconfig. > > The full boot log is: > ## Booting kernel from Legacy Image at 82000000 ... > Image Name: Linux-4.4.3+ > Image Type: ARM Linux Kernel Image (no loading done) (uncompressed) > Data Size: 8112968 Bytes = 7.7 MiB > Load Address: fffffff2 > Entry Point: fffffff2 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 88000000 > Booting using the fdt blob at 0x88000000 > XIP Kernel Image (no loading done) ... OK > Using Device Tree in place at 88000000, end 88010cb3 > > Starting kernel ... > > [ 0.000000] Booting Linux on physical CPU 0x0 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.4.3+ () (gcc version 4.9.x-google 20150123 > (prerelease) (4.9.2_cos_gg_21201ea_4.9.2-r116) ) #30 Tue Mar 8 17:27:58 PST > 2016 > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), > cr=10c5387d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache > [ 0.000000] Machine model: TI AM335x BeagleBone > [ 0.000000] cma: Reserved 24 MiB at 0x8e800000 > [ 0.000000] Memory policy: Data cache writeback > [ 0.000000] CPU: All CPU(s) started in SVC mode. > [ 0.000000] AM335X ES1.0 (sgx neon ) > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 64960 > [ 0.000000] Kernel command line: console=ttyO0,115200n8 loglevel=7 > init=/sbin/init cros_legacy cros_debug oops=panic panic=-1 noinitrd > vt.global_cursor_default=0 > capemgr.enable_partno=BB-UART1,BB-UART2,BB-UART4,BB-UART5,bone-servo-gpios,bone-servo-spi1 > root=/dev/mmcblk0p3 ro rootfstype=ext4 rootwait > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 > bytes) > [ 0.000000] Memory: 218028K/262144K available (10677K kernel code, 836K > rwdata, 3704K rodata, 592K init, 857K bss, 19540K reserved, 24576K > cma-reserved, 0K highmem) > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > [ 0.000000] .text : 0xc0008000 - 0xc0e1370c (14382 kB) > [ 0.000000] .init : 0xc0e14000 - 0xc0ea8000 ( 592 kB) > [ 0.000000] .data : 0xc0ea8000 - 0xc0f791c8 ( 837 kB) > [ 0.000000] .bss : 0xc0f7d000 - 0xc1053514 ( 858 kB) > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 > interrupts > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz > [ 0.000021] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every > 89478484971ns > [ 0.000050] clocksource: timer1: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 79635851949 ns > [ 0.000068] OMAP clocksource: timer1 at 24000000 Hz > [ 0.000470] Console: colour dummy device 80x30 > [ 0.000515] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' > [ 0.000525] This ensures that you still see kernel messages. Please > [ 0.000534] update your kernel commandline. > [ 0.000559] Calibrating delay loop... 548.86 BogoMIPS (lpj=2744320) > [ 0.048563] pid_max: default: 32768 minimum: 301 > [ 0.048750] Security Framework initialized > [ 0.048769] Yama: becoming mindful. > [ 0.048821] AppArmor: AppArmor disabled by boot time parameter > [ 0.049088] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.049105] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.050234] Initializing cgroup subsys io > [ 0.050275] Initializing cgroup subsys memory > [ 0.050329] Initializing cgroup subsys devices > [ 0.050352] Initializing cgroup subsys freezer > [ 0.050387] Initializing cgroup subsys net_cls > [ 0.050407] Initializing cgroup subsys perf_event > [ 0.050427] Initializing cgroup subsys net_prio > [ 0.050448] Initializing cgroup subsys pids > [ 0.050522] CPU: Testing write buffer coherency: ok > [ 0.050598] ftrace: allocating 31771 entries in 94 pages > [ 0.204559] Setting up static identity map for 0x80008200 - 0x80008258 > [ 0.212365] devtmpfs: initialized > [ 0.236406] VFP support v0.3: implementor 41 architecture 3 part 30 > variant c rev 3 > [ 0.258482] omap_hwmod: debugss: _wait_target_disable failed > [ 0.316406] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 19112604462750000 ns > [ 0.319786] xor: measuring software checksum speed > [ 0.418511] arm4regs : 670.800 MB/sec > [ 0.518506] 8regs : 601.200 MB/sec > [ 0.618507] 32regs : 599.600 MB/sec > [ 0.718505] neon : 967.600 MB/sec > [ 0.718517] xor: using function: neon (967.600 MB/sec) > [ 0.718626] pinctrl core: initialized pinctrl subsystem > [ 0.721372] NET: Registered protocol family 16 > [ 0.725267] DMA: preallocated 256 KiB pool for atomic coherent > allocations > [ 0.734367] OMAP GPIO hardware version 0.1 > [ 0.749607] No ATAGs? > [ 0.749650] hw-breakpoint: debug architecture 0x4 unsupported. > [ 0.928636] raid6: int32x1 gen() 128 MB/s > [ 1.098521] raid6: int32x1 xor() 95 MB/s > [ 1.268872] raid6: int32x2 gen() 165 MB/s > [ 1.438707] raid6: int32x2 xor() 112 MB/s > [ 1.608832] raid6: int32x4 gen() 163 MB/s > [ 1.778551] raid6: int32x4 xor() 109 MB/s > [ 1.948595] raid6: int32x8 gen() 169 MB/s > [ 2.118633] raid6: int32x8 xor() 98 MB/s > [ 2.288512] raid6: neonx1 gen() 805 MB/s > [ 2.458524] raid6: neonx1 xor() 466 MB/s > [ 2.628530] raid6: neonx2 gen() 1039 MB/s > [ 2.798546] raid6: neonx2 xor() 645 MB/s > [ 2.968513] raid6: neonx4 gen() 1064 MB/s > [ 3.138526] raid6: neonx4 xor() 665 MB/s > [ 3.308510] raid6: neonx8 gen() 541 MB/s > [ 3.478535] raid6: neonx8 xor() 407 MB/s > [ 3.478548] raid6: using algorithm neonx4 gen() 1064 MB/s > [ 3.478558] raid6: .... xor() 665 MB/s, rmw enabled > [ 3.478568] raid6: using intx1 recovery algorithm > [ 3.491647] edma 49000000.edma: TI EDMA DMA engine driver > [ 3.498697] SCSI subsystem initialized > [ 3.499681] usbcore: registered new interface driver usbfs > [ 3.499792] usbcore: registered new interface driver hub > [ 3.499917] usbcore: registered new device driver usb > [ 3.500727] omap_i2c 44e0b000.i2c: could not find pctldev for node > /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring > probe > [ 3.500796] omap_i2c 4819c000.i2c: could not find pctldev for node > /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring > probe > [ 3.500946] media: Linux media interface: v0.10 > [ 3.501053] Linux video capture interface: v2.00 > [ 3.501209] pps_core: LinuxPPS API ver. 1 registered > [ 3.501220] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo > Giometti <giome...@linux.it> > [ 3.501266] PTP clock support registered > [ 3.502198] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 > [ 3.503983] NetLabel: Initializing > [ 3.504004] NetLabel: domain hash size = 128 > [ 3.504012] NetLabel: protocols = UNLABELED CIPSOv4 > [ 3.504097] NetLabel: unlabeled traffic allowed by default > [ 3.505224] clocksource: Switched to clocksource timer1 > [ 3.636952] NET: Registered protocol family 2 > [ 3.638152] TCP established hash table entries: 2048 (order: 1, 8192 > bytes) > [ 3.638203] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) > [ 3.638244] TCP: Hash tables configured (established 2048 bind 2048) > [ 3.638353] UDP hash table entries: 256 (order: 0, 4096 bytes) > [ 3.638381] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [ 3.638666] NET: Registered protocol family 1 > [ 3.639393] RPC: Registered named UNIX socket transport module. > [ 3.639412] RPC: Registered udp transport module. > [ 3.639421] RPC: Registered tcp transport module. > [ 3.639430] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 3.641012] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 > counters available > [ 3.644220] futex hash table entries: 256 (order: -1, 3072 bytes) > [ 3.644382] audit: initializing netlink subsys (disabled) > [ 3.644490] audit: type=2000 audit(3.540:1): initialized > [ 3.646190] zbud: loaded > [ 3.646667] VFS: Disk quotas dquot_6.6.0 > [ 3.646757] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 > bytes) > [ 3.647667] NFS: Registering the id_resolver key type > [ 3.647772] Key type id_resolver registered > [ 3.647785] Key type id_legacy registered > [ 3.647826] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [ 3.648287] fuse init (API version 7.23) > [ 3.648641] SGI XFS with ACLs, security attributes, realtime, no debug > enabled > [ 3.656354] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 249) > [ 3.656636] io scheduler noop registered > [ 3.656661] io scheduler deadline registered > [ 3.656723] io scheduler cfq registered (default) > [ 3.658439] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568 > [ 3.661517] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled > [ 3.665655] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, > base_baud = 3000000) is a 8250 > [ 4.467095] console [ttyS0] enabled > [ 4.471821] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, > base_baud = 3000000) is a 8250 > [ 4.481743] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160, > base_baud = 3000000) is a 8250 > [ 4.491630] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 161, > base_baud = 3000000) is a 8250 > [ 4.501483] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 162, > base_baud = 3000000) is a 8250 > [ 4.512289] [drm] Initialized drm 1.1.0 20060810 > [ 4.518885] usbcore: registered new interface driver dln2 > [ 4.585324] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 > [ 4.591475] davinci_mdio 4a101000.mdio: detected phy mask fffffffe > [ 4.598168] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] > [ 4.606446] libphy: 4a101000.mdio: probed > [ 4.610507] davinci_mdio 4a101000.mdio: phy[0]: device > 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 > [ 4.620686] cpsw 4a100000.ethernet: Detected MACID = d0:ff:50:52:5c:5a > [ 4.629357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 4.636067] ehci-platform: EHCI generic platform driver > [ 4.641578] ehci-omap: OMAP-EHCI Host Controller driver > [ 4.647415] usbcore: registered new interface driver usb-storage > [ 4.666634] 47401300.usb-phy supply vcc not found, using dummy regulator > [ 4.677638] 47401b00.usb-phy supply vcc not found, using dummy regulator > [ 4.687112] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver > [ 4.692933] musb-hdrc musb-hdrc.1.auto: new USB bus registered, > assigned bus number 1 > [ 4.701185] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 4.708052] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 4.715332] usb usb1: Product: MUSB HDRC host driver > [ 4.720325] usb usb1: Manufacturer: Linux 4.4.3+ musb-hcd > [ 4.725770] usb usb1: SerialNumber: musb-hdrc.1.auto > [ 4.731962] hub 1-0:1.0: USB hub found > [ 4.735852] hub 1-0:1.0: 1 port detected > [ 4.742936] mousedev: PS/2 mouse device common for all mice > [ 4.750812] omap_rtc 44e3e000.rtc: already running > [ 4.756302] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as > rtc0 > [ 4.764355] i2c /dev entries driver > [ 4.768513] Driver for 1-wire Dallas network protocol. > [ 4.776523] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 > sec > [ 4.784636] omap_hsmmc 48060000.mmc: Got CD GPIO > [ 4.790349] ledtrig-cpu: registered to indicate activity on CPUs > [ 4.796612] hidraw: raw HID events driver (C) Jiri Kosina > [ 4.802879] usbcore: registered new interface driver usbhid > [ 4.808537] usbhid: USB HID core driver > [ 4.812737] ashmem: initialized > [ 4.816839] remoteproc0: wkup_m3 is available > [ 4.821322] remoteproc0: Note: remoteproc is still under development > and considered experimental. > [ 4.830384] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and > backward compatibility isn't yet guaranteed. > [ 4.843523] oprofile: using arm/armv7 > [ 4.848042] NET: Registered protocol family 10 > [ 4.854193] mip6: Mobile IPv6 > [ 4.857330] NET: Registered protocol family 17 > [ 4.861975] Key type dns_resolver registered > [ 4.866314] mpls_gso: MPLS GSO support > [ 4.870737] omap_voltage_late_init: Voltage driver support not added > [ 4.878342] ThumbEE CPU extension supported. > [ 4.882670] Registering SWP/SWPB emulation handler > [ 4.888949] registered taskstats version 1 > [ 4.893329] zswap: loaded using pool lzo/zbud > [ 4.899200] Btrfs loaded > [ 4.903849] Key type encrypted registered > [ 4.910794] input: tps65217_pwr_but as > /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0 > [ 4.941511] tps65217 0-0024: TPS65217 ID 0xf version 1.2 > [ 4.947684] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 4.954652] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz > [ 4.962533] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 4.970158] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 4.977678] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 4.985126] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 4.992122] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz > [ 5.004441] bone_capemgr bone_capemgr: Baseboard: > 'A335BONE,00A6,1715BB000457' > [ 5.011764] bone_capemgr bone_capemgr: > compatible-baseboard=ti,beaglebone - #slots=4 > [ 5.075249] bone_capemgr bone_capemgr: slot #0: No cape found > [ 5.135417] bone_capemgr bone_capemgr: slot #1: No cape found > [ 5.195246] bone_capemgr bone_capemgr: slot #2: No cape found > [ 5.255245] bone_capemgr bone_capemgr: slot #3: No cape found > [ 5.261148] bone_capemgr bone_capemgr: initialized OK. > [ 5.267218] omap_hsmmc 48060000.mmc: Got CD GPIO > [ 5.273310] omap_rtc 44e3e000.rtc: setting system clock to 2016-02-19 > 00:17:19 UTC (1455841039) > [ 5.282185] of_cfs_init > [ 5.284810] of_cfs_init: OK > [ 5.293289] vmmcsd_fixed: disabling > [ 5.297707] Waiting for root device /dev/mmcblk0p3... > > The bootargs related to root partition are: > root=/dev/mmcblk0p3 ro rootfstype=ext4 rootwait > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
