On Friday, April 1, 2016 at 4:41:15 PM UTC-5, RobertCNelson wrote: > > On Fri, Apr 1, 2016 at 4:33 PM, SriRam Chadalavada <chsr...@gmail.com > <javascript:>> wrote: > > This may be a naive question but how might I be able to obtain access to > BBB > > J1 connector from a Cape board stacked on it? In other words, how and > where > > should I attach the 3.3V TTL serial console cable that I used with BBB > J1 > > connector when a cape is stacked? > > > > According to: > > > http://www.toptechboy.com/wp-content/uploads/2015/06/beaglebone-black-pinout.jpg, > > > > serial console UART0 from J1 connector is NOT exposed over the 40 pins. > Is > > that correct? If so, what is the alternative to connect to serial > console > > prompt? > > Option 1: > > Plug in a usb mini cable to the port under the led's.. > > "/dev/ttyACM0" should show up on your linux desktop; > > gtkterm -s 115200 -p /dev/ttyACM0 > > Option 2: > > Or these also work nice: > > http://elinux.org/CircuitCo:Right_Angle_Serial_Adapter > > If you order from boardzoo, don't forget to ping them via email, > sometimes they can be a little slow.. ;) > > Regards, >
Thanks! I'll order the part right away. Cheers, Sriram -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
