On Wed, Apr 13, 2016 at 6:19 AM, <yolc...@gmail.com> wrote: > My BBB has to communicate with a new homemade cape, which has different > I2C sensors and a MCU controlled by UART. > > The BBB has a Debian 7.8 distro, Debian 4.6.3-14, with 4.1.18-ti-r56 > kernel. > > Then, I need to add cape support into capemgr in order to work with the > cape. > Looking for some info, I have just found that Device Tree Overlays (*.dtbo > & *.dts) files need to be stored at "*/lib/firmware*". > And there must be the '*bone_capemgr.X*' path into "*/sys/devices*". > > The fact is that there is no '*bone_capemgr.X*' path at "*/sys/devices*". > > So, I have two issues here: > > 1. How to build my own device tree overlay? > 2. And the main one, *how to add it to the system properly*? > > Due to there is no capemgr support ('*bone_capemgr.X*') at my BBB, it > would be great to know how to add it. >
4.1.18-ti-r56 has capemgr support.. https://github.com/beagleboard/bb.org-overlays Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.