> On Apr 19, 2016, at 10:27 , Rafael Vega <conta...@rafaelvega.co> wrote:
>
> > dtb=am335x-boneblack-audio.dtb
> >
> > doesn't setup the emmc...
>
> Does this mean that the board won't be able to boot from the emmc when using
> this dtb? If so, how is it supposed to be used?
I had to make one that also enabled the emmc:
http://pastebin.com/Wja7ZQRk
Note that there's a problem with that file. It includes
am33xx-overlay-edma-fix.dtsi, which causes the mcasp driver to load first, and
it ends up not being properly configured when you load the overlay. I'll be
writing a full DTS for my project, rather than use the overlay mechanism, but
for now that's how I do it.
--
Rick Mann
rm...@latencyzero.com
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/2FD3DBD5-999E-4129-B25A-F091E34DE86B%40latencyzero.com.
For more options, visit https://groups.google.com/d/optout.
