Hi all, I posted this to the Beaglebone list as well, but it seems a bit dead so I'm reposting here.
I would like to find a way to set the speed of the UARTs to something other than the standard speeds offered by termios. I'm running a BBB Rev C with Debian 8.3, stock kernel from beaglebone.org. I'm using the universal cape and config-pin for setup (because it works well enough, so far). I currently have it working with a serial speed of 115.2 kbps, but the listener can't handle any of the standard termios speeds above that. It can handle 250, 500, or 1000 kbps, however. How can I set the BBB UARTs to operate at one of those speeds? -p PS -- I've considered shifting over to SPI on the next hardware rev, but that will be a little bit and I'd like more speed now. -- Pierce Nichols Principal Engineer Logos Electromechanical, LLC -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAENK0Pz5t2FyDi-b42krTfZayFEUB_vBV%2BqqiKKFtz0NKFK0TQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.